A passenger pairs their Bluetooth device with the GMC Infotainment System. (U.S. Model Shown).

How To: Pair Your Bluetooth Device with GMC Infotainment System®1

Want to use your smartphone to place hands-free calls or stream music inside your new GMC?
Bluetooth®2 makes it possible – and here’s how you can connect your phone.

 

Please note: Information presented here represents 2018 models and feature availability. Depending on the model year, model, trim level, and available equipment installed on your GMC, Bluetooth® availability and pairing process may differ. Always consult your vehicle’s owner’s manual or the GMC Owner Centre to find information that directly applies to your specific vehicle, or ask your GMC dealer for further assistance.

 

FIRST STEPS

Before you grab the keys to your GMC, take a look at your phone. There are a few initial things you need to ensure are enabled in order for it to connect and interact with your vehicle’s GMC Infotainment System1.

Make sure your phone’s Bluetooth® connectivity2 is active – look for an icon in a taskbar, or a button/switch to indicate Bluetooth is on.

Also, make sure your phone is “discoverable” – meaning it can be found and recognized by other Bluetooth systems looking for devices to pair with.

The specific steps you need to follow for this process may differ depending on the type of phone and the software it utilizes. Be sure to consult your phone’s instruction manual should you have any questions.

 

The 7-inch diagonal colour-touch screen (standard on GMC Terrain)

 

You can pair your phone by using either voice commands or through physical Infotainment System controls.

 

To pair phone by voice commands:

 

  • Press the Push to Talk button on the screen, and say “Bluetooth®.” The system will respond by saying “Bluetooth® ready.”
  • Wait for the beep, and then say “Pair.”
  • The system will respond with “Please start a search on your Bluetooth® phone.”
  • Search for possible Bluetooth® connections on your phone or device. Select your vehicle from the available options.
  • You will be asked to enter a 4-digit code, which is displayed on screen, or to confirm a 6-digit code displayed on your phone matches one displayed on the radio.

 

To pair phone through radio screen:

 

  • Tap the PHONE icon on the home screen or in the frequently used apps area
  • Tap “Connect Phone”
  • Tap “Add Phone”
  • Follow the on-screen instructions.
  • The display screen will then prompt you to start a Bluetooth search on your phone, and provide a four-digit pin.
  • Start the pairing process on the cell phone.
  • Locate and select the device named after the vehicle Make and model on the cell phone. Follow the instructions on your cell phone to enter or confirm the PIN shown on the vehicle’s screen.
  • If prompted by the phone to accept the connection or allow phone book access/download, select “Always accept,” or “Allow” in order to utilize contact dialing within the vehicle.

 

The 7-inch diagonal colour-touch screen (standard on Acadia, Canyon and Sierra), or the 8-inch diagonal colour- touch screen (standard on Yukon; available on Acadia, Canyon, Sierra)


You can pair your phone either by way of voice commands or through the radio interface itself.

 

To pair a phone with voice commands:

 

  • Press the Push to Talk button on the screen, and say “Bluetooth®.” The system will respond by saying “Bluetooth® ready.”
  • Wait for the beep, and then say “Pair.”
  • System will respond with “Please start a search on your Bluetooth® phone.”
  • Search for possible Bluetooth® connections on your phone or device. Select your vehicle from the available options.
  • If your phone supports Simple Secure Pairing (SSP), it will pair with the phone.
  • If your phone does not support SSP, you will be asked to enter or confirm a code which will be displayed on the infotainment screen.
  • If prompted by the phone to accept the connection or allow phone book access/download, select “Yes,” “Always accept,” or “Allow” in order to utilize contact dialing within the vehicle.

 

To pair phone through the infotainment screen:

 

  • Press the “HOME” button
  • Touch the “Phone” screen icon, or press the phone button
  • Select the “Search Device” option on the touchscreen menu.
  • Select the device you wish to pair from the touchscreen menu. If it does not show, make sure Bluetooth® is enabled and the phone is discoverable.
  • If your phone supports Simple Secure Pairing (SSP), it will pair with the phone.
  • If your phone does not support SSP, you will be asked to enter or confirm a code which will be displayed on the infotainment screen.
  • If prompted by the phone to accept the connection or allow phone book access/download, select “Yes,” “Always accept,” or “Allow” in order to utilize contact dialing within the vehicle.

 

For more information on Bluetooth® pairing procedures for your particular GMC, please refer to your vehicle’s owner’s manual, or visit the GMC Owner Centre.