back to smartphones and connections back to smartphones and connections Back to myGMC Mobile App

HOW TO

HOW TO SEND REMOTE COMMANDS TO YOUR VEHICLE

Difficulty Level: Novice  |  Time Required: 5 Minutes |  Tools Required: None |  Related Parts, Products, Services or Technology: Compatible smartphone

The myGMC® mobile app† lets you send remote commands to your vehicle, if your vehicle is properly equipped and your active service plan supports this service. The essential controls are found on the My Vehicle tab of your vehicle app, with additional options found on the Controls tab. The available controls are found on the Home screen of your vehicle app and vary depending on the features of your vehicle.

Learn more about the mobile app and how to get started.

REMOTE START THE VEHICLE/ENGINE

Start the vehicle so it’s ready for your departure or cancel a remote start† command.

1. From the app’s Home screen, press and hold the centre Climate (on some vehicles, you tap the Start icon).

  • Remote commands only require a single tap, but pressing and holding for 3-5 seconds will still work.

2. The button will say “Sent” once the command is successful.

3. On some vehicles, the cabin temperature will be shown above the button (updated every 3 minutes).

4. On equipped vehicles, tapping the center Climate or Start icon again turns the vehicle or Climate off and/or changes temperature. 

REMOTE LOCK/UNLOCK

Remotely unlock or lock your vehicle’s doors.

1. From the My Vehicle tab on the app’s Home screen, tap the Lock or Unlock icon. 

2. In addition to remote start and lock/unlock†, your vehicle may also support other remote commands from the app.

  • In the Home screen of the Controls tab, you’ll see all of your available controls. You can also tap Learn More for more information on remote commands. 
  • Sound/stop alarm: Tap the Sound Alarm or Stop Alarm icon. 
  • Flash lights: Tap the Flash Lights icon or the Stop Lights icon.
  • Unlock trunk/tailgate/liftgate or front closure (if equipped): Tap the Unlock Trunk, Unlock Tailgate, Unlock Liftgate or Unlock eTrunkTM icon (depending on your model; select models only). 
  • The front or rear closures will automatically re-lock after a few minutes.

If the command fails, here are some things to check before attempting the command again:

  • Remove the key fob from the vehicle and ensure any manual key is removed from the ignition. 
  • Make sure you are at least 10 feet away from the vehicle.
  • Check that all doors and the trunk, hood and gas cap are closed..
  • Make sure hazard lights are turned off.

If an error occurs while trying to use a remote command, go to your app’s Command

History page, then:

  • Tap your initials > Settings > Command History.
  • Tap the Triangle icon to view the error and recommended resolution.
    • If no errors are identified, continue to the next step.
  • Start the vehicle, let it run for 60 seconds, then turn the vehicle off.  
  • Retry the remote command. 

Couldn't find parsys in reference partial. Please confirm the partial exists and is published.

RELATED LINKS AND RESOURCES

How to Use myGMC Mobile App

Q&As

I’m unable to remote start or unlock my vehicle with a remote command. What can I do to resolve this?

There are many reasons a remote start or unlock could fail. Here are some things to double-check before trying the command again: 

  • Turn off the vehicle. If the engine is on, this will block remote start. 
  • Make sure the key fob battery is strong. 
  • Confirm that your vehicle and app are connected. Both must have a stable internet connection for remote commands to be successful.
  • Make sure your mobile app version is up to date.

What if my vehicle and/or remote commands aren’t showing up?

First, make sure you’ve selected the correct vehicle. Open the app and tap your initials, then swipe left or right to browse vehicles. Tap to select.

You can also check the connection status of your vehicle in this menu. Or you can log into the brand website for your vehicle and select Account Overview.

If your vehicle is shown as connected:

Tap your vehicle > Manage Plans > See Details to confirm remote commands are included.

If your vehicle is not listed or shown as not connected: 

  1. Tap Add Vehicle > your vehicle > Continue.
  2. Follow the prompts to confirm vehicle/account details (be sure to enter the same phone number or email provided to your Dealer).
  3. Choose where to receive a one-time passcode (OTP).
  4. Enter the 6-digit code when received. 
  5. If not received after 1 minute, tap “Try again” to request a new code.
  6. Confirm your vehicle and OnStar plan.
  7. Return to the app and sign out/sign back in

LOOKING FOR SOMETHING ELSE?

NEED MORE HELP?

Communicate with one of our specialists.

CONTACT US

To find out if your vehicle has this feature, contact your dealer or refer to your vehicle’s equipment list. Please check your Owner’s Manual for more information about features.

You are leaving gmccanada.ca

You are leaving gmccanada.ca to visit a website that is operated independently and not maintained by General Motors of Canada and where the General Motors of Canada privacy policy does not apply.

This link is provided to you for convenience and does not serve as an endorsement by General Motors of Canada of information or content that you may find on this site.

CONTINUE | CANCEL